Prep for Can Lights

Work for the can lights is underway! We started by breaking out the CNC again. We cut four 12x96” wide strips of plywood and used the CNC to slice out six super-percise mounting holes in each: Then, we cut sheets of 1” rigid insulation for each by and a series of side spacers. The insulation will…

Raised Floor - Part A

Ironically, we reached a point with the electrical where we needed the raised floor to be in place before continuing. The floor contains a “chaise”, towards the end of the trailer, which we need to tack the romex onto. So, before we continue with the electrical we will need to get the floor ready…

Electrical has begun!

Ever have one of those processes that sounded enjoable before you began? Well, electrical is one of them. This is gonna be easy. Right? After all, we are starting with a clean slate … Oh, and we have some cool toys to make things easier (these are great to work with, by the way) … However…

Sealing Wheel Wells

The first stage in becomming water-tight is complete! Spanning the wheel wells are two sets of large headers. These support the walls and prevent any of the weight from resting on the fenders. This created a need to encase the those areas. This meant building two boxes to surround these areas…

Page 3 Of 7

Stay up to date with our progress.

Subscribe to our newsletter and stay updated.